Tag Archive for 'car repair'

What You Need To Start Painting Your Car - Spray Paint

Published
by
Ulrich Fieldman
on July 22, 2009
in self improvement
. 0 Comments
by Ulrich Fieldman

You could be very good at painting your car, provided youve a good plan, the proper budget and the time. In addition to all of this you will most surely need the exact tools and equipment. Oh yeah, and you will require a nice and spacious work area.

Often inexperienced individuals feel that all they require to paint their vehicles, is a couple cans of automobile paint, and that’s it. It doesnt work that way, and if it did then there will be a lot of car painters out of business.

Tools and equipment to paint your car are not a massive expense, but you do need them.

Item #1 To set out with you would need a pretty good car wash detergent and a degreaser. The car must be utterly clean before you set out.

Item two A variety of grits of sandpaper. Probably there’re going to be several uneven spots that you would need to smooth out.

Item three Putty and a putty knife. Nearly all cars suffers from those nasty pits that flying stones cause. This’s often one of the reasons to prompt you to paint the vehicle in the first place.

Item four Masking tape and paper to cover the areas that you don’t want to get paint on. Don’t make the mistake of thinking that you’re good enough with a spray can so you could skip this step. One small gust of wind is all it needs to spot the chrome with over-flow paint.

Item #5 Now youre getting closer to genuinely getting down to starting. You will need the primer. How much you need counts on the amount of sanding and filling you had to do.

Item #6 The paint’s of your preference. What colours and brands you are going to utilize is the decision you require to make here.

Item #7 One of the most important items is the top coat. You really need to protect that stunning paint job once youre complete.

These’re several of the tools and equipment plus product you’ll require to do your job effectively. There’re few items that we need to speak about a bit more in depth. For illustration, how are you going to apply your paint? You might have chosen to go with the aerosol spray paints. In this case you would not need much more to apply the paint. In the case that youve decided to purchase paints that require a spray gun, then you got to include this in your tools and equipment list.

Other item under tools and equipment although nonobligatory is an electric sander. If you have alot of sanding to do then really consider either renting or borrowing one of these if you dont own them. It can save you a lot of time and comfort as well.

Keep in mind it is fundamental that you clean each of your tools and equipment correctly once you’ve completed the job. Some of the items are not all that affordable and you never know when your next paint job will come up.

About the Author:
Visit SprayPaintSecrets and get your hands on a comprehensive step-by-step course that leads you by the hand and reveals all the secrets of professional car body paint spray tips. - spray paint car parts.

Professional Custom Paint Designs on Cars - Automotive Spray Painting

Published
by
Ulrich Fieldman
on July 21, 2009
in self improvement
. 0 Comments
by Ulrich Fieldman

It gets pretty boring when you are driving down the expressway and you see all the identical colors of vehicles. Sure they’re different makes and styles, but color wise they are totally the same and dull. And then every once in a while some thing really dynamic stops beside you. It’s one of those cars that has been painted with a custom design. To paint a car is one thing but to custom paint it is a whole new thing.

At least when you went to purchase your car you had a couple more colour selections then maybe your grandfather did in his day and age. Now, not only do you’ve to determine on colour, you need to decide if you want metallic, or rust-free or even scratch proof finishes.

You genuinely got to know what you what when painting your car. It isnt cheap to custom paint a car. The paints are a really high grade poly urethanes.

When it comes time and you want to paint a car and you’ve determined to have a customize design put on it, then you are going to have to choose which type you want. Few years back the burning flame was the rage. To see a black car with those flames running down the sides was the envy of every other avid car lover.

The flames are still really hot but the designs are more or less different. They cover more of an area.

Some other favourite design is animals such as the wild mustangs or the flying eagle. And then there’re designs that’re just abstract in nature. The skulls and cross bones type art used to be much more popular when it came to motorcycles, but it has sort of caught on with those car buffs that genuinely want to paint a car with the customise designs. Other different observation as well is that people like to just have the art painted as a mural on their trunks for instance.

One of the newer kind designs that truly sort of fit in between the skulls and the flames is the dragons. These are becoming progressively popular, and one has to admit they do look somewhat amazing.

In todays age if youve decided to paint a car and have a custom design then you will find that an automotive logo design is suggested to you.

And then there are individuals who want to paint a car all in metallic with a variety of colors as opposed to whatsoever type of graphic. These can be quite stunning when the colour selection goes well together and the air-brush color application flows.

One thing to keep in mind, it you want to paint a car and customize it with a design, it’s not cheap. It can get quite costly the more defined and elaborate you go. Unless your intention is to keep the car, it’ll be quite pricy to customise paint it..

About the Author:
Have you seen super-slick automotive paint spray jobs on shows cars and wanted that kind of look for your own vehicle? Learn how to spraypaint car and other vehicles at SprayPaintSecrets official site now.

Advanced Spray Painting Tips and Techniques - Car Spray Paint

Published
by
Edward Gainer
on July 20, 2009
in self improvement
. 0 Comments
by Edward Gainer

Once you’ve decided that you’re going to re paint your vehicle then youre going to need to learn the techniques involved in getting a lasting finish. Naturally, the product youre going to need is car spray paint. This comes in a variety of forms, but each one has its individual special way of applying it.

You’ll find the most average type of car spray-paint utilizes compressed gas. Then compressed air is utilised to provide the ability to spray it. There’re also a variety of spray guns on the market specifically designed for this type of painting chores.

If you are doing only touchup or a small job then you should find the standard canned spray-paint adequate. These are aerosol cans of car spray paint that are very pressurise. To apply you keep your arm moving as you speedily apply a moderate coat of the paint to the preferred area. Do not hesitate in moving the can as you would end up with runs.

Then you’ve to the choice of using the huge spray guns. In this case, the spray gun would mix the paint with the air to acquire the needed pressure. Over again, you’ll only want to apply a light coat and once again keep your arm moving. If you don’t keep an even sweep of the paint, you’ll end up with an inappropriate finish. There’s alot of over spray with this method as about 1/3 will go to the object while two thirds goes into the air.

Another type of technique you can utilise is with a High Volume Low Pressure sprayer. Its very similar to the conventional spray gun except the gun requires less pressure. In this case, though a higher volume of air is required. This method if you utilise it properly will mean reduced over-spray so more car spray paint would reach the target area. In this case 2/3 rds of the paint will be utilized with one third going into the air. Opinions differ as to whether one like utilising the HVLP techniques.

For hard to reach areas you can utilise the electrostatic spray-painting. Once again, this method is more efficient for the amount of car spray paint that hits the target region.

There are various other methods that are really identical. In regards to techniques it primarily depends on the kind of equipment youre utilizing. Most of the equipment used for car spray paint will come with instructions and suggestions. In almost every case though it’ll urge whatever light coats as opposed to one or 2 heavy ones. The standard techniques of keeping the paint moving will most likely be instructed.

If possible, you would want to practise a little with whatever equipment you decide on. Better to make your mistakes on some other object besides your car. If you dont you could end up with a good deal more work than you bargained for.

About the Author:
Warning! Don’t start a spray paint job until you’ve seen this. Click this - auto spray paint. Learn to do car respray and spray paint techniques workshops do not want you to know!

Do You Know The Hazards of Car Spray Painting? - Spray Paint

Published
by
Esti Edwards
on July 19, 2009
in self improvement
. 0 Comments
by Esti Edwards

Often when we are taking on whatsoever type of project, we’ll briefly evaluate whatever possible dangers that require to be avoided. Accidents often happen though when we neglect to look at all the possible risks. In cases where products or equipment are being used we need to take the what if approach when gauging the safety factors.

When it gets to spray painting a car there’re numerous safety factors you must take a look at. One area is for individual safety and some other for success of the job.

From the individual safety point of view, you must remember that you’re going to be dealing with primers, paints and finishes. Various of these can be harmful to breath or flammable. Ideally, you should read every labels and instructions on every ware you will be utilising. These’ll inform you as to what proper safety guards you must take. It is very critical that you follow them.

To start with, you must make sure that you’ve the particular mask. There’re a couple types but you would be best to have two types. One is for dust so when you’re sanding rust spots for illustration you should wear the right mask. The other type is for fumes. Now if you’re working in a well ventilated area you will not require this one. They’re small and handy, so wear them to take precaution! Several paints and wares are stronger than some others. This includes various of the commercial paint strippers too.

Wearing gloves may be some thing you have to consider, especially if you’re utilizing any caustic products, which would include the pain stripper. By wearing gloves, you are ensuring your hands are going to stay paint free, which means you will not need a chemical to remove the paint from them once you’re finished.

A couple people find wearing safety goggles a pain. Make no mistake though they can save your eyesight should an unlucky accident occur. A piece of rust or even a splash from one of the products could be easily stopped by these goggles.

Aside from the safety clothing, you must think about your surroundings also. Attempt to keep your work area clean and orderly. If you’ve all kinds of items, lying around it can not only be detrimental to your personal safety, but can produce a lot of mess that would require a clean up.

Concentrate on your work, which means no distractions if possible. Most importantly, keep youngsters and pets away from your work field.

When it comes to safety points on the real job there are a couple of things you would want to remind yourself about. Hopefully you’ve done a couple of research on how to paint your motorcar, so you recognize the fundamentals. Numerous of the errors that can give you the most problems are not having the automobile totally clean before you begin. Or you did not take the time to sand down the rough or rusted spots. Remember to do various light coats and allow for drying in between.

About the Author:
Have you seen super-slick automotive paint spray jobs on shows cars and wanted that kind of look for your own vehicle? You can download free videos on car bodywork paint at SprayPaintSecrets now…

What If You Can Spray Paint You Car in 6 Easy Steps?

Published
by
Esti Edwards
on July 10, 2009
in self improvement
. 0 Comments
by Esti Edwards

With the failing economy and the falling wages of worker, perhaps the solution to giving your car a different look will be to give your car a complete new paint job. If the mechanics and the engine of the car is in good shape, but you do not fancy the car body, then painting it will be the ideal answer.

Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It’s important though if you decide you are going to take on this project that you are ready to see it complete till the end.

First of all, you require various supplies. These comprise of:

-coverings to secure the unpainted areas and masking tape to hold these in place -a good car-wash detergent and brush as well as a wax/grease remover. -various grits of sandpaper -primers and paint that’s urethane base for the car spray painting -paint sprayer -safety tools example masks, goggles and protective clothing -knife and putty for fill ins.

One : You must be sure that you wash the car thoroughly to remove every grime and debris. If you don’t then these things will be set in with your paint, leaving a genuinely frustrating look to the completed job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting would adhere properly.

Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This’s where you will want to use the putty to fill in any small pit marks, that’re have been caused from stones for illustration.

Three : Do not get in too much of a hurry to begin your car spray painting. The car must be totally dry so its best to leave it to do so for few hours. You could go ahead and cover any of the areas that your dont want to get paint on.

Four : At present youre ready to set out with the primer. Don’t skip this step, as it’ll give a much better look to the finished project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you’ll need to lightly sand it down.

Five : Youre eventually at the step youve been waiting for. Its time to apply the color for your car spray painting. Whether you’ve selected to use aerosol paints or a spray gun, the premise remains the same. Merely apply thin coats. A couple would likely be needed. A Couple light coats are much better than one thick coat. You’ll be able to tell just by looking at the car how many more coats of paint it would need. Various would only require two whereas others will require three or 4.

6 : In conclusion, down to the last step and that’s applying the clear coat. This’s done exactly the same as the colored coats.

Now you can clean up, step back and look up to the masterpiece youve produced.

About the Author:
Announcing: The first do-it-yourself spray painting and bodywork course that guarantees you results or your money back. Learn how to spray paint cars with SprayPaintSecrets 2 DVD Course.

How To Repair Car Paint and Bodywork After A Serious Collison

Published
by
Barry Holdenpole
on July 6, 2009
in self improvement
. 0 Comments
by Mario Goldstein

Torque spec comes into play after a fastener has been chosen. Bolt torquing is very important. When you thread and tighten a bolt the melt stretches a little, but the metal doesn?t want to be stretched so it resists the stretches and this is where you get the holding power from. This is why when you over tighten it can?t hold the load because it can?t return to its normal shape. Further to this in time the bolt continues to stretch and will end up snapping.

Torque-to-Yield Bolts

A torque to yield fastener is a one-time use that is based on this torque principal we just talked about. The torque spec usually have a 25% safety feature giving you a 25 per cent over tightening leniency. The torque to yield bolts don?t have this safety buffer. They are not meant to stretch the metal. This may sound like a disadvantage but it?s not really. They are extremely strong as they afford the whole 100% of their strength whereas the basic bolt only gives you about 75%.The one disadvantage they do have though is they can only be used once. So if you remove them you have to replace them with a TTY (torque to yield) bold. You are going to end up with 25% less strength with the basic fastener.

The TTY are used in many cases so it?s important for the technician to be aware of this during the estimation process of the procedure.

Tightening Sequence A tightening sequence can also be specified in conjunction with torque specs. A crises cross pattern is use to install wheels and now some installation patterns are being suggested for body panel fasteners. There is a certain amount of expanding and contracting during temperature fluctuations with composite panels. This means the fasteners have to adjust to these changes and must be designed to allow for this.

Shop Tips Whenever possible replace the fastener with the same type as the one your remove. Check the manual however to ensure it is the correct part and you are doing the proper procedure. Every part is specific because there is a reason for it.

Keeping track of what you are removing is important and time saving so tossing them in a pile is not the answer. Just use some small plastic bags, put them in and then mark what they are on the outside of the bag.

If you do not have a manual, you can ask a dealership to show you their service manual.

Use all the parts that come with your replacement parts.

If you are not sure about the label, compare height, thread pitch and diameter to the new piece and this will help you choose the right replacement fastener.

Make sure to use coated materials to prevent corrosion. A classic example of making this mistake is using a non-coated steel boat with an aluminum panel. If the coated items you require are not available then use a plastic or fiber gasket, a washer or even a layer of paint to produce a barrier between the materials.

About the Author:
Learn the easiest way to learn spray painting cars with free videos and lessons. SprayPaintSecrets will give you the step by step guide you need to learn spray painting techniques.

How To Restore Your Car Paint - Finishing Bodywork

Published
by
Mario Goldstein
on July 3, 2009
in self improvement
. 0 Comments
by Mario Goldstein

If you are performing, auto body finishing your work area has to be almost sterile unless of course you enjoy having to strip, sand, repaint and buff repeatedly on the same car because something got into the paint or finish or you left some residue and went onto the next step. If there is anything present that could ruin your finishing work then it probably will.

One of the most valuable assets you can have is a quality wax and grease remover. Most often the to the job at home guy ends up with an inferior finish if all due to not removing the residue of anything from the car like old wax and dirt build up or airborne debris.

There are solvents that can be used but you are taking a chance when you use these. Many novice auto body finishers are devastated when the mistakes made before the primer application start to appear. The key to being successful is to know the right materials for the job. Then it?s knowing how to use them. Finally when and where should they used.

What You will Need -There are lots of products that will remove grease and wax but you need to remove silicone. -You will need about 3 gallons - Solvent and lint free rags actually cheesecloth or tough quality paper towels are the best -detail scrubbing brush to get at hard to get spots where there may be silicone

Do Not Use -regular lacquer thinner (can create havoc with paint systems) -enamel reduced (same reason) -cheap rags (Note: if you really have to use lacquer thinner work quick and don?t let it soak into the prime coat too much or too long)

Degreasing Times: It certainly is not a one-time operation. At least not when you consider that if you were to even leave one print smudge on the car it will likely show up as discoloration in the finish. It is imperative that you remove any and all of grease, wax and silicone? -prior to touchups -prior to the bare metal conversion coating -prior to filling and glazing -prior to primers -prior to basecoat -prior to finishing coats

The Right Spots to Degrease: The areas that you are going to be working on such as the body and panel.

Do not miss around all these areas? Trim, weather stripping, cowel louver, panel joints and air intakes Inside the head and taillight apertures, only necessary if you have removed the trim or bezels. Also around the door areas, inside of hood and the lid of the trunk and the wheels

Be absolutely sure that you remove all the cleaner and then wipe with a clean rag. If in doubt do it again.

Reasons for Degreasing -To know you are going to get the best results - its yours and the business reputation at stake -the cost of the materials such as primer surfacer, primer, metallic, clear coats -labor of yours and what you pay in wages

About the Author:
If you enjoyed this article, visit SprayPaintSecrets to learn spray paint car video lessons. You’ll master paint repair techniques and bodywork tips. Download your free video now - spray paint car how.
SEO Powered by Platinum SEO from Techblissonline