Crazy People Work From Home…

With the failing economy and the falling wages of worker, perhaps the solution to giving your car a different look will be to give your car a complete new paint job. If the mechanics and the engine of the car is in good shape, but you do not fancy the car body, then painting it will be the ideal answer.

Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It’s important though if you decide you are going to take on this project that you are ready to see it complete till the end.

First of all, you require various supplies. These comprise of:

-coverings to secure the unpainted areas and masking tape to hold these in place -a good car-wash detergent and brush as well as a wax/grease remover. -various grits of sandpaper -primers and paint that’s urethane base for the car spray painting -paint sprayer -safety tools example masks, goggles and protective clothing -knife and putty for fill ins.

One : You must be sure that you wash the car thoroughly to remove every grime and debris. If you don’t then these things will be set in with your paint, leaving a genuinely frustrating look to the completed job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting would adhere properly.

Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This’s where you will want to use the putty to fill in any small pit marks, that’re have been caused from stones for illustration.

Three : Do not get in too much of a hurry to begin your car spray painting. The car must be totally dry so its best to leave it to do so for few hours. You could go ahead and cover any of the areas that your dont want to get paint on.

Four : At present youre ready to set out with the primer. Don’t skip this step, as it’ll give a much better look to the finished project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you’ll need to lightly sand it down.

Five : Youre eventually at the step youve been waiting for. Its time to apply the color for your car spray painting. Whether you’ve selected to use aerosol paints or a spray gun, the premise remains the same. Merely apply thin coats. A couple would likely be needed. A Couple light coats are much better than one thick coat. You’ll be able to tell just by looking at the car how many more coats of paint it would need. Various would only require two whereas others will require three or 4.

6 : In conclusion, down to the last step and that’s applying the clear coat. This’s done exactly the same as the colored coats.

Now you can clean up, step back and look up to the masterpiece youve produced.